Can you ever have enough open storage? I know I certainly can’t, and a diy tiered stand is a great way to repurpose some inexpensive thrift store finds.
For me tiered stands are one of the most useful storage solutions because they can be made out of so many different things, which means they can be used in so many different ways.
Today, I’m sharing how easy it is to create a diy tiered stand using just three thrift store items and a few simple tools.
DIY Tiered Stand
They are two 50 cent metal strainers, one a little smaller than the other, and a $1 wooden counter top paper towel holder.
A paper towel holder like this is perfect for a diy tiered stand project because it unscrews from its base.
Look for the complete list of tools needed for this project at the end of this post.
The first thing I did was spray paint the paper towel holder white.
I taped off the handles of both strainers before spray painting.
This is purely a personal choice, but I like the look when they’re left the silver.
If you want to save a little time you could totally skip the tape.
Then I sawed off the top knobby part of the paper towel holder. I’m not using it in this project so it’ll be saved in my stash.
Sawing it off was so easy because the indentation was already there to follow with my mitre box and saw.
DIY Tiered Stand Assembly
The great thing about using strainers for a diy tiered stand project is that they already have holes in them… so no drilling is required. Yay!
You might have to enlarge the center hole though, so the screw that’s already in the paper towel holder will fit through.
This is so easy to do with just a large nail and a hammer, provided your metal strainer isn’t too thick.
It was at this point that the day got too hot and muggy so I had to move inside to get this project finished.
The paper towel holder base fit right inside the bottom of my strainer.
This is super important so you have no problem screwing the paper towel holder together through the bottom of the strainer.
If the bottom doesn’t fit then the top part won’t reach the base to screw in properly.
After screwing the paper towel holder through the strainer I marked the center at the top.
And again I just used a good size nail and a hammer to make a start hole for a screw.
And I screwed on the top strainer.
I just used a lone screw that I found in my tool box among many other lone screws.
Here’s a good look at the bottom strainer after it was put together.
Thankfully the early evening was not quite as warm so I was able to go back outside to take some pics in the natural light.
As you can see in this pic the screw in the top strainer almost disappears, and it allows for more room than if I had the knobby thing in the middle.
Of course you can spray paint your strainers any color you want.
Filling my DIY Tiered Stand
Silver metal goes beautifully with so many colors.
But for me pink, any shade tone or hue, and silver are just meant to be together.
What do you think? What color would you paint yours?
To make it even easier you don’t have to spray paint anything at all.
Just use what you find it its au natural state, and you’ll be done this diy tiered stand project in no time.
As I said at the beginning of this post tiered stands can be made out of so many things, and today’s project is just one example.
So if you’ve never made one, give it a try!
NOTE: For your convenience this post contains some affiliate links to items that I’ve used to create this project. If you purchase anything using a link below Thrifty Rebel Vintage will receive a small commission, but it won’t cost you a penny more. See my full disclosure here.
A diy tiered stand is a great way to store things that you use every day so you can see them. And it’s a fabulous way to repurpose some thrifted finds.
Thanks so much for reading, and until next time…
keep on keepin’ on!
Don’t forget to pin this to your favourite Pinterest board.